Precise Built-in precision measuring device
VOGEL

Precise Built-in precision measuring device - VGL-230726



Request for Quote
Firms RFQ will be sent to
Contact
İntech Mak. San. ve Dış Tic. Ltd. Şti.

Dial Bore Gauge 50-100mm, EAN: 4010873432569, Weight: 1,2, GTIP: 90178090000

There is no additional information about this product.

There is technical documentation information about this product.

Same Branded Products
Steel ruler 1000x40x2.0 mm
VOGEL
Steel ruler 1000x40x2.0 mm
Point angle 60°, 120x 80mm
VOGEL
Point angle 60°, 120x 80mm
Working scale, 4000x50x10mm
VOGEL
Working scale, 4000x50x10mm
Micrometer, custom, 50-75mm
VOGEL
Micrometer, custom, 50-75mm
Steel - single gauge block, 4.00 mm
VOGEL
Steel - single gauge block, 4.00 mm
Control and spotting plate
VOGEL
Control and spotting plate
Sentil gauge tape 1.80 mm
VOGEL
Sentil gauge tape 1.80 mm
Measuring plate, hard rock, G.0
VOGEL
Measuring plate, hard rock, G.0
Test pin set, 0.5 - 1.0 mm
VOGEL
Test pin set, 0.5 - 1.0 mm
Sentile Gauge Tape 0.25mm/.010"
VOGEL
Sentile Gauge Tape 0.25mm/.010"
Digi extension ruler, 150mm/6"
VOGEL
Digi extension ruler, 150mm/6"
hairline 1500 mm,
VOGEL
hairline 1500 mm,
Same Categorized Products
Shore A Hardness Tester 20-90HA
WERKA
Shore A Hardness Tester 20-90HA
Flat Buffer Gauge 4 mm
WERKA
Flat Buffer Gauge 4 mm
Cylinder Comparator Zeroing Gauge
WERKA
Cylinder Comparator Zeroing Gauge
200 mm Mechanical Depth Caliper
DW MEASURING
200 mm Mechanical Depth Caliper
Flat Ring Gauge 16 mm
WERKA
Flat Ring Gauge 16 mm
IP66 Single Jaw Dig, Caliper 800x0,01 mm -100
WERKA
IP66 Single Jaw Dig, Caliper 800x0,01 mm -100
100-125 mm Digit, Metal Outer Diameter Micrometer
DW MEASURING
100-125 mm Digit, Metal Outer Diameter Micrometer
Carburetor Injector Bore Gauge
DW MACHINERY
Carburetor Injector Bore Gauge
IP66 Double Jaw Dig, Caliper 500x0,01 mm -150
WERKA
IP66 Double Jaw Dig, Caliper 500x0,01 mm -150
Inner Diameter Pipe Micrometer 50-75 mm -2-3"
WERKA
Inner Diameter Pipe Micrometer 50-75 mm -2-3"
250 mm 0.02 Flat Precision Machine Scale
DW MEASURING
250 mm 0.02 Flat Precision Machine Scale
Fine Tooth Ring Gauge M12x1.5 Not Exceeding
WERKA
Fine Tooth Ring Gauge M12x1.5 Not Exceeding

RFQ

RFQ on existing products or on manually added requests without any registration.

CONTACT SUPPLIERS

Contact suppliers through supplier or product pages.

BE A SUPPLIER

List your brands and industrial products.

VOGEL / Precise Built-in precision measuring device - VGL-230726

İntech Mak. San. ve Dış Tic. Ltd. Şti.
Contact RFQ